catálogo de produtos

Seja bem-vindo ao nosso catálogo virtual de produtos !

.

Em março de 2010 a WEBTEX inova novamente o atendimento virtual aos clientes e visitantes do site :

Com o catálogo virtual de produtos, todos os visitantes do site poderão comentar, opinar, criticar, solicitar informação e conhecer problemas e soluções de outros colegas.

.

Aproveitamos para convidá-lo a participar de nossa newsletter, assinando na página de nosso site:   clique aqui

Para nos contactar : clique aqui

Ou pelo telefone:  (21) 2218-3774

Para localizar nosso endereço : clique aqui

Nosso site :  www.webtex.com.br

.

Seja bem-vindo e boa leitura !

.

.

Elevador Plataforma, Pantógrafo

Mesa tipo Plataforma para Elevação de Cargas e Pallets, com sistema pantográfico por acionamento hidráulico.

 Descrição geral:
 
 – Extra Baixa para Paletização e ergonomia, esta mesa permite também relocação para outros postos de trabalho, pois a mesma é apoiada sobre o piso, não utilizando chumbadores.
 
 – Acionamento da elevação por motor elétrico trifásico (220v – 60 Hz), com painél elétrico acoplado ao conjunto oleo dinâmico completo separado da estrutura, estando previsto 2 metros de fiação e tubulação de interligação.
 
 – Botoeira de comando em 24Vcc , sobe desce que acionado até o final do curso enquanto premida. Construção em chapas, perfilados e cilindros de aço (este sem costura e com retentores especiais) e pistões protegidos por cromo duro.
 
 – Pintura da Estrutura: Duas demãos de tintas a base de poliuretano na cor laranja segurança. 2,5 YR 6/14 (09.014)
 
 ** Todos os circuitos elétricos, sistema hidráulico, acabamento superficial, construção e mecânica, serão executados conforme padrão Zeloso..
 ** SOB AS LATERAIS DA PLATAFORMA ESTÁ PREVISTO UM QUADRO DE DESLIGARÁ A DESCIDA DA MESA, CASO ENCONTRE QUALQUER OBSTÁCULO.
 
 
 CARACTERÍSTICAS TÉCNICAS :
 
 – CAPACIDADE MÁXIMA DE CARGA DISTRIBUÍDA 500 kg
 – ALTURA DA PLATAFORMA ELEVADA 450 mm
 – ALTURA DA PLATAFORMA ABAIXADA 165 mm
 – PERCURSO ÚTIL DE ELEVAÇÃO 285 mm
 – COMPRIMENTO DA PLATAFORMA 1.550 mm
 – LARGURA DA PLATAFORMA 1.250 mm
 – VELOCIDADE ASCENSIONAL ESTIMADA 2 m/min
 – PESO PRÓPRIO 350 kg

.

Peças RIETER, TRÜTZSCHLER, SAVIO, MURATA, MARZOLI

As fiações brasileiras desejam reduzir os custos de manutenção, comprando peças com preços menores.

Há 8 anos a WEBTEX trabalha com peças genéricas (não originais) e peças originais para máquinas destes fabricantes.

Oferecemos a partir de nosso estoque para fiações parceiras ou importamos sob encomenda, com prazos de entrega muito curtos (máx. 30 dias).

+ Preços competitivos,
+ Qualidade comprovada,
+ Garantia,
+ Parceria para estoque no Brasil,
+ Identificação pelo código do fabricante,
+ Entrega rápida.

Estroboscópio – ESL-100

ESL-100

Estroboscópio Portátil, de LED

ESL-100"The brightest, hand held, fully featured LED stroboscope in a compact design. The ESL-100 series LED stroboscope is designed to measure the speed of rotating or cycling linear motion objects without contact or reflective tape, as well as freeze motion visually. Lifetime LED lights using pulse width modulation, encased in an aluminum housing, and powered by a NiMH rechargeable battery, make this pocket strobe extremely durable and capable of high flash rates. The ESL-100 is an ideal inspection strobe for for speed, motion and vibration analysis, such as rotating shafts, fans, cams, etc.AdjustableAdjustable Flash Duration
For most applications standard flash duration works without adjustment. For utra high rpm or larger objects rotating with high surface speed, ESL-100 features adjustable flash duration.
For ultra high speed applications, objects may move during the brief period of a single flash, resulting in a blurred image. By decreasing flash duration, objects have less time to move and the image will appear sharper.
.
  • Características

bluedot High efficiency LED solid-state light source – never needs replacement like traditional xenon lamps.
bluedot Extended battery life of 10 hours continuous use at 6,000 fpm/rpm
bluedot Pulse Width Modulation for sharp images at high speed
bluedot Highly stable drift free operation
bluedot Auto wide measuring range – up to 120,000 fpm/rpm (over 100,000 display flashes)
bluedot Push button operation with x2 and ÷2 buttons for easy and precise adjustment
bluedot 359° Digital phase shift adjustment by 1° increments
bluedot Store up to 19 flash rates in memory for records or quick retests (Restarts at the last flash rate)
bluedot Includes NIST Traceable Calibration Cert
bluedot ET-1 External Trigger Kit is optionally available includes external sensor and AC-Adapter for auto synchronization of strobe
.
  •  Fotos

.
.
.
.
 Light Output (LUX) vs Distance
light output
at 30 cm Distance, 6000 flashes/min (FPM)
.
  • Dimensions

dimensions

.
  • Kit Completo

The ESL-100 is supplied in foam-fitted carrying case with LED Stroboscope, AC-Adapter/Charger, instruction manual and NIST-Traceable Calibration Certificate. complete kit

 Specifications

Measuring Range 6.0 – 120,000 fpm/rpm
Resolution ±0.1 fpm/rpm (6.0 to 9999.9 fpm/rpm)
±1 fpm/rpm (10000 to 120000 fpm/rpm)
Accuracy ±0.007%, ±1 LSD
Display 12mm high, 5digit LCD
Light Source 96 LED Array, never needs replacement
Brightness 350 Lux brightness (measured at 6000 fpm at a distance of 50 cm)
Power NiMH Rechargeable battery
Battery Life 10 hours (@ 6,000 rpm when fully charged)
Charge Time 6 Hours with overcharge protection
Operating Temp 32° to 113° F (0 to 45° C)
Weight 1.2 lb/540g
Housing Material Aluminum
Tripod Mount 1/4-20 UNC on backside
Phase Shift 0-359° in 1° increments
Flashrate Adjust COARSE: press “x2” or “÷2”
FINE: press “v” or “^”
Synchronous Output NPN Open collector 30V, 10mA max., 100 µs pulse width
Synchronous Input Low level: 0~0.8VDC, High level: 2.5-30VDC, or use with NPN open colector output, 50 µs minimum pulse width, negative edge trigger
Warranty 2 years

 Optional ET-1 External Trigger Kit

“>Optional ET-1 External Trigger Kit The External Trigger immediately synchronizes the stroboscope with a rotating object. The sensor is aimed at a ferrous target mounted on the drive shaft and triggers the strobe to flash each time the target passes the sensor. ET-1 is complete with sensor, cables and AC adapter. Ferrous target not-included.

Target Material Ferrous material
Target Size 4mm dia. (minimum)
Sensing Distance 3mm (based on 10 mm dia. target)
Max Speed 50 m/min (using 10mm dia. target)
Max Frequency 1 KHz
Sensor size 12 mm dia. x 45 mm; M12 connector
Cable Length 1.8 m (6′)
Power AC adapter (up to 240VAC)

Estroboscópio compacto LED – NS-600

estroboscópio compacto em LED, modelo NS-600  com ajuste do tempo de Flash

led strobeThe NS-600 LED stroboscope is designed to measure the speed of a rotating object or one that is cycling in a linear repetitive pattern ….. without contact or reflective tape. When the flash rate and rpm rate are identical, the target will appear frozen” visually. If the flash rate it adjusted slightly, the target would be put into slow motion for detailed motion analysis, observation or trouble-shooting.The NS-600 features a rugged cast-Aluminum housing, the latest LED technology and compact size making it a perfect choice for use anywhere on the factory floor. The NS-600 is ideal for speed, motion and vibration analysis, such as rotating shafts, fans, cams, etc.NS-600 automatically adjusts flash duration for ultra high speed and features a user-selectable flash duration for those applications where the user wants to optimize either the image “sharpness” or increase the “brightness” to the highest levels.

estroboscópio NS-600

  • Características

 High efficiency LED solid-state light source – never needs replacement
 Highly stable drift free operation
 Push button operation with x2 and ÷2 buttons for quick adjustment
 Uses two AA-Batteries providing continuous operation of 8 hours
 Auto wide measuring range – up to 120,000 fpm/rpm
 Store up to 10 flash rates in memory for recall or quick re-tests
 Easy-to-read 5 digit 0.47″ (12 mm) high LCD

.

  •  Ranges
Range Resolution
6.0 to 9999.9 fpm/rpm ±0.1 fpm/rpm
10000 to 120000 fpm/rpm ±1 fpm/rpm (over 100,000 display flashes)
.20 ~ 999.00 Hz 0.01 Hz
1000.0 ~ 2000.0 Hz 0.1 Hz

.

  •  Especificações
Selectable Units fpm or Hz
Accuracy ±0.01%, ±1 LSD
Display 12mm high, 5digit LCD
Power 2- AA batteries
Operating Temp 0 to 45° C
Weight .5 lb/225 g

.

  • Dimensions

Dimensions

.

  • Kit Completo

The NS-600 LED stroboscope is supplied as a complete kit including the strobe, 2 AA batteries, instruction manual and calibration cert in a fitted carrying case. Complete kit

Rugosímetro – TR-110

Rugosímetro TR-110

Teste de Rugosidade de Superfícies – portátil – TR-110

Portable surface roughness tester for determining surface texture, combining measurement of roughness parameters Ra and Rz in one instrument.The compact portable TR-110 roughness tester is designed for fast and precise measurement. It employs a piezoelectric microsensor technique which is identical to that of high-precision laboratory roughness testers. The outstanding features of the TR-110 include user-friendly operation and a high repeating accuracy.Simply press a button and within seconds, a microsensor in the form of a diamond stylus scans the surface. Depending on the pre-set cut-off length, the digital display shows either the roughness parameter Rz or Ra (see also DIN 4762, 4768, 4775, ISO 4288.)The TR-110 roughness tester can determine both parameters (Ra and Rz) in one surface scan. An integrated sleeve can be slid over the sensor tip in order to protect the TR-110™ during periods of non-use. In addition to this, an automatic 1.5 minute switch-off function protects the lithium-ion battery against unnecessary discharge.
  • Roughness Parameters
Ra = arithmetical mean roughness value
Ra, signifying the roughness parameter, is a value that is recognised and used internationally. It denotes the arithmetical mean value of the absolute values of the profile deviations within the sample area. The numerical value of Ra is always smaller than the Rz reading derived from the same sample.Rz = mean roughness depth (peak to valley)
Rz denotes the mean roughness depth, i.e. the arithmetical mean of the highest single measurements of several single adjacent tracing sections.
  •   Features
 Pocket-sized model
 Li-ion rechargeable battery
 Protection slide on pick-up
 Sound signal start-test-ready
 Software calibration
 Piëzo-electric pick-up stylus for external surfaces
 LCD with back-light
 Dynamic test display: progress of cut-off length during testing
 Auto-off after 90 seconds
 Both Ra and Rz parameters in one instrument
 Large measuring range suitable for most materials

 

 

  •   Complete Kit
The TR-110 Surface Roughness Tester is delivered as a complete kit including:

  • TR-110 Roughness Tester
  • Protection cover for tracer
  • Roughness test plate Ra
  • Soft bag
  • Charger
  • Carrying case
  • Manual
  • Certificate

Optional accessories:

  • Steel hardcoated roughness test plates
  •   Specifications
Roughness parameter Ra, Rz
Units µm / µinch
Measuring range Ra: 0.05-15.0µm / Rz: 0.1-50µm
Cut-off lengths 0.25mm, 0.8mm, 2.5mm
Filter 2CR
Functions Dynamic display during testing, sound signal start-test-ready, auto-off 90 seconds, back-light LCD
Calibration By CAL function
Min. curvature of cylindrical surface 40mm diameter (V-grooved base)
Tracing length 6mm
Tracing speed 1.0mm/sec
Accuracy Conforms to ISO Class 3
Pick-up stylus Piëzo-electric
Tracer tip Diamond, radius 5µm
Operating temperature 0°C – 40°C
Power 3.6 V / Li-ion batteries / low battery indication
Charger 6V DC
Dimensions 110mm x 70mm x 24mm
Weight 200gr

Rugosímetro – SPG

PosiTector SPG Surface Profile Tester

Range: 0 – 500 microns / 0 – 20 mils
Accuracy: ± (5 microns + 5%) / ± (0.2 mil + 5%)

The PT-SPG Surface Profile Gage is a precise, rugged tester designed to measure and record peak to valley surface profile heights.

The PT-SPG is available in Standard (SPG1) or Advanced (SPG3) configuration. The standard model has a monochrome display, 250 reading memory and USB data output. The Advanced model adds a high contrast color LCD display, Scan Mode, Real-Time Graphing Bluetooth output and more.

Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others.


Features

Simple

  • Fast measurement rate of over 50 readings per minute – ideal for quickly and accurately measuring surface profile over large surface areas
  • Large, easy-to-read, graphics LCD
  • Enhanced one-handed menu navigation
  • RESET feature instantly restores factory settings

Durable

  • Solvent, acid, oil, water and dust resistant – weatherproof
  • 60º angle tungsten carbide tip for long life and continuous accuracy – field replaceable
  • Rugged, outdoor/indoor instrument – ideal for field or shop use
  • Shock-absorbing, protective rubber holster with belt clip and wrist strap
  • Two (2) year warranty on body and probe

Accurate

  • Built-in temperature compensation ensures measurement accuracy
  • Certificate of Calibration showing traceability to NIST included
  • Glass Zero Plate and metal shim included
  • Conforms to national and international standards including ISO and ASTM

Versatile

  • Universal gage accepts all PosiTector SPG (surface profile), DPM (environmental) and 6000 (coating thickness) probes
  • 30º angle interchangeable probe tip available for special surface profile applications
  • Selectable display languages
  • Hi Contrast backlit display for bright or dark environments
  • Flip display enables right-side-up viewing
  • Uses alkaline or rechargeable batteries (built-in charger)

Powerful

  • Continually displays/updates average, standard deviation, min/max thickness and number of surface profile readings
  • HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits
  • Every stored measurement is date and time stamped
  • USB port for fast, simple connection to a PC and to supply continuous power. USB cable included
  • Multiple measurement download/transfer options:
  • USB mass storage – stored readings and graphs can be accessed using universal PC/ Mac web browsers or file explorers. No software required
  • PosiTector.net – a free web-based application offering secure storage of thickness readings
  • PosiSoft Software Compatible – Continue using the familiar legacy software you have used for years. Available as a free download.
  • Software updates via web keep your gage current


 Gauge Selection

Feature Comparison Chart
Standard
(1)
Advanced
(3)
Hi Contrast LCD Display

Monochrome

Color
General Features
Standard
(1)
Advanced
(3)
FAST mode – faster measurement speed for quick inspection

SCAN Mode – take continuous readings without lifting the probe

Hi-Lo limits audibly and visibly alerts when measurements exceed your specified limits

Instantly calculate average, standard deviation, min/max thickness and number of readings while measuring

Onscreen help, real time graphing, picture prompting and batch notes
Memory Features & Capacity
Standard
(1)
Advanced
(3)
Reading Storage Capacity
250 in one group
10,000 in up to 1000 groups
Create meaningful batch names and enter notes directly on the instrument using a familiar on-screen QWERTY keyboard.
SSPC PA2 feature set determines if film thickness over a large area conforms to user-specified min/max levels
PSPC 90/10 feature determines if a coating system complies with an IMO performance standard for protective coatings
Multiple stored calibration adjustments for measuring on a variety of substrate conditions
Connection Options
Standard
(1)
Advanced
(3)
USB port for fast, simple connection to a PC and to supply continuous power. USB cable included
WiFi technology wirelessly synchronizes with PosiSoft.net, downloads software updates, and connects to mobile devices for expanded functionality
Wireless Technology for data transfer to a PC or optional portable printer
PosiSoft Solutions
Standard
(1)
Advanced
(3)
PosiSoft 3.0 Desktop Software Desktop software for PC or Mac computer
PosiSoft USB Drive Access your PosiTector as a flash drive. View and print readings and graphs using universal PC/Mac web browsers or file explorers
PosiSoft.net (formerly PosiTector.net) Cloud-based application offering centralized management of PosiTector readings
PosiSoft Mobile Gage-based software application featured in all PosiTector Advanced instruments
  • Photo Gallery

Lanterna Profissional – LED – recarregável

  • Uma lanterna recarregável para uso industrial ou no carro com carregador para tomada elétrica e para o carro
  • Multi-função Torch : alto brilho, meio-brilho e função pisca
  • ferramenta indispenável que auxilia nas emergências;
  • corpo (carcaça) fabricada em Alumínio muito resistente e leve
  • Fonte luminosa : lâmpada CREE 3W LED , com 130 lumens, clara
  • Bateria Recarregável : 2500 mAH Ni-MH
  • a prova d’água : IF 64 com grande alcance de 100 metros
  • dimensão : 40 x 40 x 203 mm,   peso : 200 gramas

.

.

.

Flanges de Rolos de Urdume – JAMETTI

Liga de Metal Leve ou Aço Zincado.
Flanges com diferentes tipos e diâmetros: de 300 a 1600 mm.
Light metal alloy or steel clamping rings.
Tipos de fixação: radial ou axial.
Superfície da face interna retificada,
Light metal alloy flanges with anodizing or epoxy painting treatment by request.
Steel flanges with electrolitically zinked surface.
Modelos de acordo com ISO 8116
Espessura dos flanges MÓVEIS ou FIXOS segundo solicitação do cliente ou de acordo com as instruções do fabricante dos teares. 

MOVEABLE RIBBED FLANGES

Type LG (Q1) with radial ribs,
max. thickness 85 mm,
for cotton yarn.
POLYGONAL Type (Q2)
with polygonal ribs,
max. thickness 90 mm,
for wool, mixed yarns and
discontinuous synthetic yarns
(spun yarn)
.

STAR Type (Q3) with crossed ribs,
thickness from 85 to 115 mm,
for relaxed synthetic yarns and
technical yarns.
RDH Type (Q3-Q4) with radial ribs,
thickness from 85 to 130 mm,
for unrelaxed synthetic yarns,
technical yarns and textile glass yarns.


MOVEABLE DOUBLE WALL FLANGES
Under the same resistance they have inferior deformations and flexions compared to ribbed flanges.
They are more suitable for fine yarns.

OSCAR Type (Q2)
max. thickness 85 mm
for discontinuous synthetic yarns
(spun yarn).
TITAN Type (Q3)
TITAN-H Type (Q4)
max. thickness 85 mm
for continuous synthetic yarns.


FIXED FLANGES FOR HALF BEAMS

Light metal alloy type,
thickness from 29 to 40 mm,
for natural yarns.
Steel zinked type,
thickness from 15 to 37 mm,
for synthetic yarns.

CLASS

Q1 Q2 Q3 Q4
20<K<50 50<K<125 125<K<200 K>200
Yarns from natural fibres.
Cut yarns.
Mixed yarns from natural and man-made fibres having a proportion of mixture up to 67/33.
Filament yarns from regenerated cellulose.
Silk natural yarns.
Textile glass yarns.
Continuous synthetic yarns (polyester, polyamide) which are relaxed after spinning operation. Filament yarns as CLASS Q3 but unrelaxed.

Last updated Wednesday, 21 November, 101.